The university of the west indies at saint augustine

Faculty of Engineering

how to apply

Admission Requirements

Entry requirements for all undergraduate programmes offered by the Faculty of Engineering, UWI St. Augustine. Requirements are listed by programme — use the sections below to find what applies to your chosen field of study.

Minimum criteria for all applicants

Applications will only be considered if an applicant has:

  • Satisfied the University's Matriculation Requirements for entry to a Degree Programme; and
  • Amassed qualification points as specified in Regulations 3.1.1 to 3.1.7. Qualification points are obtained by summing individual qualification scores as defined in the table below.

how to apply

Qualification code reference

The codes below are used throughout the programme requirements to identify accepted qualifications. Refer to this table when reading the entry requirements for your programme.

Code Full Name
A' LevelAdvanced Level Examinations GCE (Cambridge or London)
O' LevelOrdinary Level Examinations GCE (Cambridge or London)
CXCCaribbean Examinations Council
CSECCaribbean Secondary Education Certificate
CAPECaribbean Advanced Proficiency Examination
GCEGeneral Certificate of Education (Cambridge or London)
N1Preliminary Subjects at the former Faculty of Science and Agriculture, UWI
N2Introductory Subjects at the former Faculty of Science and Agriculture, UWI
BCCBarbados Community College
CASTCollege of Arts, Science & Technology
COSTAATTCollege of Science, Technology and Applied Arts of Trinidad and Tobago
EEETElectrical & Electronics Engineering Technician
METMechanical Engineering Technician
NECNational Examinations Council
PreENGPre-Engineering Programme, administered by the Faculty of Engineering, UWI St. Augustine
PreSci1Preliminary Subjects at the Faculty of Science and Technology, UWI
PreSci2Introductory Subjects at the Faculty of Science and Technology, UWI
TTITTrinidad & Tobago Institute of Technology
UTechUniversity of Technology, Jamaica
UTTUniversity of Trinidad and Tobago

Requirements by programme

Select a programme below to view its specific entry requirements. Requirements are additional to the minimum criteria above and must be read together with the qualification codes table.

BSc (Hons) Chemical & Process Engineering
  • A minimum total of 13 qualification points as calculated from Table 3.1, based on passes in Pure Mathematics, Physics and Chemistry at any combination of A' Level or CAPE (averaged over CAPE I and II) or N1 and N2, or PreSci1 and PreSci2; OR
  • A minimum GPA of 3.5 obtained in PreENG; OR
  • Any of the following Diplomas, based on merit:
    • UTT National Engineering Technician Diploma (NETD) – Chemical Engineering (GPA of 3.5 and above)
    • BCC Associate Degree in Science – Chemistry, Mathematics, Physics (GPA of 3.5 and above)
    • COSTAATT Associate Degree – Chemistry, Physics (GPA of 3.5 and above)
      OR
  • Any other qualification considered by the Department, in addition to those listed in Regulation 3.1.

Full Chemical Engineering admissions page

BSc (Hons) Civil Engineering & Civil with Environmental Engineering
  • Pass in Chemistry at GCE O' Level or CSEC or equivalent; AND
  • A minimum total of 7 qualification points as calculated from Table 3.1, based on passes in Pure or Applied Mathematics and Physics at any combination of A' Level or CAPE (averaged over CAPE I and II) or N1 and N2, or PreSci1 and PreSci2; OR
  • A minimum GPA of 2.5 obtained in PreENG; OR
  • Any of the following Diplomas, based on merit using the scores calculated in Table 3.1:
    • NEC Construction Engineering Technician (Trinidad & Tobago) – Score of 65% and above
    • BCC Ordinary Technician Diploma (GPA of 3.0 and above)
    • CAST or UTech Technician Diploma (Jamaica)
      OR
  • Any other equivalent qualification and experience as determined by the Department, in addition to those listed in Regulation 3.1.

Full Civil Engineering admissions page

BSc Electrical & Computer Engineering
  • Pass in Chemistry at GCE O' Level or CSEC or equivalent; AND
    A minimum total of 8 qualification points as calculated from Table 3.1, based on passes in Pure Mathematics and Physics at any combination of A' Level or CAPE (averaged over CAPE I and II) or N1 and N2, or PreSci1 and PreSci2; OR
    A minimum GPA of 2.5 obtained in PreENG; OR
  • Any of the following Diplomas, based on merit using the scores calculated in Table 3.1:
    • NEC (CET, EEET, MET) Diplomas with a B+ grade (65%) in final year Mathematics
    • TTIT/UTT Mechanical or Electrical Technician Diploma with a B+ grade in final year Mathematics and GPA of 3.0 and above
    • COSTAATT Associate Degree with A grade in final year Mathematics and GPA of 3.5 and above
    • CAST or UTech Diplomas in Mechanical or Electrical Technology with a B+ grade in final year Mathematics
    • BCC Ordinary Technician Diploma in Mechanical or Electrical Technology with a B+ grade in final year Mathematics and GPA of 3.5 and above
      OR
  • Any other qualification considered by the Department, in addition to those listed in Regulation 3.1.

Full Electrical & Computer Engineering admissions page

Bsc Geomatics Engineering
  • A minimum total of 6 qualification points as calculated from Table 3.1, based on passes in Pure or Applied Mathematics and one other science-related subject at any combination of A' Level or CAPE (averaged over CAPE I and II) or N1 and N2, or PreSci1 and PreSci2; OR

  • A minimum GPA of 2.0 obtained in PreENG; OR

  • Any of the following Diplomas, based on merit using the scores calculated in Table 3.1:

    • UTT Surveying or Civil Engineering Technician's Diploma (GPA of 2.8 and above)

    • BCC Surveying Technician's Diploma (GPA of 3.0 and above)
      OR

  • Any other qualification considered by the Department, in addition to those listed in Regulation 3.1.

Full Geomatics Engineering admissions page

BSc Industrial & Bsc Mechanical Engineering (incl. Biosystems Minor)
  • Pass in Chemistry at GCE O' Level or CSEC; AND
  • A minimum total of 8 qualification points as calculated from Table 3.1, based on passes in Pure Mathematics and Physics at any combination of A' Level or CAPE (averaged over CAPE I and II) or N1 and N2, or PreSci1 and PreSci2. Note: preference will be given to additional passes in Applied Mathematics; Technical Drawing will also be an asset. OR
  • A minimum GPA of 2.5 obtained in PreENG; OR
  • Any of the following Diplomas, based on merit using the scores calculated in Table 3.1:
    • NEC Mechanical Engineering Technician Diploma – Score of 65% and above
    • COSTAATT Associate Degree (GPA of 3.5 and above)
    • TTIT/UTT Technician Diploma (GPA of 3.0 and above)
    • BCC Ordinary Mechanical Technician Diploma (GPA of 3.5 and above)
      OR
  • Any other qualification considered by the Department, in addition to those listed in Regulation 3.1.

Full Mechanical Engineering admissions page

BSc Land Management (Valuation)
  • A minimum total of 6 qualification points as calculated from Table 3.1, based on passes at any combination of A' Level or CAPE (averaged over CAPE I and II) or N1 and N2, or PreSci1 and PreSci2, in any two of the following subjects: Pure Mathematics, Applied Mathematics, Physics, Geography, Accounting, Economics, and Management of Business; OR
  • A minimum GPA of 2.0 obtained in PreENG; OR
  • Any other qualification considered by the Department, in addition to those listed in Regulation 3.1.

Full Geomatics & Land Management admissions page

BSc (Hons) Petroleum Geoscience
  • A minimum of 13 qualification points as calculated from Table 3.1, based on passes in Pure or Applied Mathematics, Physics or Chemistry, and one other science subject or Geography at any combination of A' Level or CAPE (averaged over CAPE I and II) or N1 and N2, or PreSci1 and PreSci2. Note: the subject Physics or Chemistry not taken at CAPE or A' Level must have a distinction at O' Level or CSEC. OR
  • A minimum GPA of 3.5 obtained in PreENG; OR
  • Any other qualification considered by the Department, in addition to those listed in Regulation 3.1.

Full Chemical & Petroleum Geoscience admissions page

Important notes

CAPE & Pre-Science scoring

For CAPE, N1, N2, PreSci1 and PreSci2 subjects, the final score is derived by adding the scores for each Unit of examination and dividing by 2. For other qualifications, points are obtained by adding qualifying scores for each subject.

Unlisted qualifications

Applicants with qualifications not listed above will be assessed on a case-by-case basis.

CSEC Chemistry requirement

Applicants who do not possess the necessary CSEC Chemistry qualification but are otherwise fully qualified for entry shall be required to register for and pass an equivalent course within or outside The UWI during the first year of registration.

Subject to change

Academic requirements are current at the time of publication but may be subject to change. Admission is based on qualification points as determined by each Faculty at the time of admission and is subject to space and resource limitations.

 

Ready to apply?

Once you have confirmed your qualifications meet the entry requirements, begin your application to UWI St. Augustine.